//DON'T DELETE THIS LINE

//   KEEP A BACKUP OF THIS FILE IF YOU MODIFY IT!
//   
//   There yoy have a chance to boost your FPS,
//   the more lines you insert, the more your FPS will be high.
//   
//   The downside of using this method is that every setting
//   you will write here, will be static and so that 
//   you will NOT BE ABLE RO MODIFY it "on-the-fly" in Retroarch anymore.
//
//   Lines have this format: #define PARAMETER VALUE
//   where:
//       * PARAMETER is the shader parameter as defined in config.inc
//         (look for lines starting with #pragma there).
//       * VALUE is the value you want to assign to that parameter.
//         (it is the same you would assign to that within retroarch)
//
//   Notice, there is no equal sign, nor double quotes, so, eg:
//       If you know that you will always use the bezel frame:
//       #define DO_BEZEL 1.0
//
//       If you know you'll never alter the contrast:
//       #define CONTRAST 0.0
//
//       If you know your curvature will never change:
//       #define GEOM_WARP_X
//
//   You can disable a line by erasing it or,
//   since everything after "//" is ignored,
//   by prepending "//", eg:
//
//       // #define DO_BEZEL 1.0
//   
//   ...that's it, you just need to copy the values from the
//   preset you like to the right setting here.
//   
//   
  

 

// #define DO_CCORRECTION  1.000000
// #define IN_GLOW_POWER  1.500000
// #define LUMINANCE  0.2
// #define BRIGHTNESS  0.0
// #define CONTRAST  0.0
// #define TEMPERATURE  7700.000000
// #define IN_GLOW_GAMMA  2.000000
// #define GAMMA_OUT  0.4
// #define COLOR_MONO_COLORIZE  0.0
// #define COLOR_MONO_HUE1  0.25
// #define COLOR_MONO_HUE2  0.3
// #define COLOR_MONO_HUE_BIAS  0.0
// #define SATURATION  1.0
// #define VIBRANCE 0.0


// #define DO_FXAA  0.0


// #define DO_RF_NOISE  0.0
// #define RF_NOISE_STRENGTH  0.05


// #define DO_DEDITHER  0.0
// #define DEDITHER_TRESHMAX  1.2
// #define DEDITHER_STRENGTH  0.8
// #define DEDITHER_STRENGTH2  0.0


// #define DO_NTSC_ARTIFACTS  0.0
// #define NTSC_MIX  0.5
// #define NTSC_FILTER_WIDTH  17.0
// #define NTSC_FILTER_SCF  5.30
// #define NTSC_FILTER_FC  2.5
// #define NTSC_PHASE_SHIFT  0.0
// #define NTSC_ARTF_TRSH  0.1
// #define NTSC_SHOW_ARTF_MASK  0.0
// #define NTSC_ARTF_NOBLUR  0.0
// #define NTSC_ARTF_NOBLEED  0.0
// #define NTSC_ARTF_ZAP  0.0


// #define DO_SAT_BLEED  0.0
// #define SAT_BLEED_PAL  0.0
// #define SAT_BLEED_STRENGTH  1.0
// #define SAT_BLEED_SIZE  5.0
// #define SAT_BLEED_FALLOFF  1.7


// #define DO_PPERSISTENCE  0.0
// #define PPERSISTENCE_START  0.9
// #define PPERSISTENCE_END  0.5


// #define DO_SHIFT_RGB  1.000000
// #define OFFSET_STRENGTH  0.300000
// #define SHIFT_R  -20.000000
// #define SHIFT_G  0.000000
// #define SHIFT_B  20.000000


// #define DO_IN_GLOW  1.000000
// #define IN_GLOW_BIAS  1.0
// #define IN_GLOW_SPREAD  0.6
// #define IN_GLOW_W  -0.80000
// #define IN_GLOW_H  7.000000


// #define TATE  1.0
// #define RESSWITCH_GLITCH_SIZE 0.1

// #define DO_PIXELGRID  1.000000
// #define PIXELGRID_OVERMASK  1.00000
// #define DO_PIXELGRID_W  1.0
// #define PIXELGRID_SIZE_W  1.0
// #define PIXELGRID_MUL_X  1.0
// #define PIXELGRID_H_PRST  3.000000


// #define PIXELGRID_H_COUNT  3.0
// #define PIXELGRID_R_SHIFT  0.0
// #define PIXELGRID_G_SHIFT  1.0
// #define PIXELGRID_B_SHIFT  2.0
// #define PIXELGRID_MIN_W  0.25
// #define PIXELGRID_MAX_W  0.40
// #define PIXELGRID_GAMMA_W  1.5
// #define PIXELGRID_BASAL_GRID  0.02


// #define DO_PIXELGRID_H  1.0
// #define PIXELGRID_COREY_FAKE_SCAN  0.0
// #define PIXELGRID_MIN_H  0.300000
// #define PIXELGRID_MAX_H  0.700000
// #define PIXELGRID_GAMMA_H  5.2
// #define PIXELGRID_NO_INTERBLEED_H  0.0
// #define PIXELGRID_H_ANTIMOIRE  0.0
// #define PIXELGRID_OFFSET_CORE  0.00000
// #define PIXELGRID_DECON_R_H  0.0
// #define PIXELGRID_DECON_G_H  0.0
// #define PIXELGRID_DECON_B_H  0.0
// #define PIXELGRID_H_DEDOT  0.0

// #define LABEL_INTERLACE  0.0
// #define MIN_LINES_INTERLACED  380.0
// #define PIXELGRID_INTR_DISABLE_Y  -1.0
// #define LabelDescIntlScan1  0.0
// #define LabelDescIntlScan2  0.0
// #define PIXELGRID_INTR_FLICK_MODE  2.0
// #define PIXELGRID_INTR_FLICK_POWR  0.25


// #define PIXELGRID_Y_MASK  0.000000
// #define PIXELGRID_Y_MASK_COORDS  0.000000
// #define PIXELGRID_Y_MASK_HEIGHT  1.000000
// #define PIXELGRID_Y_MASK_OFFSET  1.0
// #define PIXELGRID_Y_MASK_SHIFT  0.150000
// #define PIXELGRID_Y_MASK_STEEP  1.000000
// #define PIXELGRID_Y_MASK_ON_WHITE  0.000000
// #define PIXELGRID_Y_SPARK  1.000000

// #define PIXELGRID_DO_SHADOWMASK  0.0
// #define PIXELGRID_SHADOWMASK_H  0.0
// #define PIXELGRID_SHADOWMASK_SHIFT 1.0

// #define DO_DOT_MATRIX  0.0
// #define DOT_M_G_STR  0.0
// #define DOT_M_G_TRESH  1.1
// #define DOT_M_G_BRT  0.0
// #define DOT_M_G_SHARP  0.0
// #define DOT_M_MBLUR_STR  0.45
// #define DOT_M_MBLUR_MODE  0.0
// #define DOT_M_SHADOW_STR  0.0
// #define DOT_M_SHADOW_OFF  0.0
// #define DOT_M_MULTIPLY  1.0


// #define DO_HALO  1.000000
// #define HALO_NO_PREGAIN  1.000000
// #define HALO_POWER  0.500000
// #define HALO_SHARPNESS  6.50000
// #define HALO_GAMMA  2.000000
// #define HALO_GAMMA_OUT  1.00000
// #define HALO_VS_SCAN  0.7


// #define DO_BLOOM  1.000000
// #define BLOOM_MIX 0.40
// #define BLOOM_SIZE  4.0
// #define BLOOM_QUALITY  1.0
// #define BLOOM_GAMMA  8.0
// #define BLOOM_GAMMA_OUT  1.2
// #define BLOOM_POWER  1.20
// #define BLOOM_EYE_ADPT_SRT  0.6
// #define BLOOM_EYE_INERTIA  750
// #define BLOOM_OVER_WHITE  0.5
// #define BLOOM_BYPASS  0.0


// #define DO_CURVATURE  1.000000
// #define GEOM_WARP_X  0.28
// #define GEOM_WARP_Y  0.32
// #define GEOM_CORNER_SIZE  0.010000
// #define GEOM_CORNER_SMOOTH  200.000000


// #define DO_BEZEL  1.0
// #define BEZEL_USE_STRAIGHT  0.0
// #define BEZEL_INNER_ZOOM  -0.01
// #define BEZEL_FRAME_ZOOM  0.17
// #define BEZEL_R  -0.3
// #define BEZEL_G  -0.3
// #define BEZEL_B  -0.3
// #define BEZEL_CON  1.3
// #define BEZEL_RFL_ZOOM  0.0
// #define BEZEL_REFL_STRENGTH  0.65
// #define BEZEL_RFL_BLR_SHD  -0.200000
// #define BEZEL_ROUGHNESS  1.0
// #define BEZEL_DIFFUSION_STR  0.0
// #define BEZEL_SPCL_STRENGTH  0.5
// #define BEZEL_CORNER_DARK  0.8


// #define DO_BG_IMAGE  0.0
// #define LABEL_WARNING1  1.0
// #define BG_IMAGE_OVER  0.0
// #define BG_IMAGE_OFFX  0.0
// #define BG_IMAGE_OFFY  0.0
// #define BG_IMAGE_ZOOM  1.0
// #define BG_IMAGE_ROTATION  -1.0
// #define BG_IMAGE_NIGHTIFY  0.0
// #define BG_IMAGE_WRAP_MODE  0.0


// #define DO_BACKDROP  0.0
// #define BACKDROP_OFFX  0.0
// #define BACKDROP_OFFY  0.0
// #define BACKDROP_ZOOM  1.0


// #define DO_AMBILIGHT  1.0
// #define AMBI_STEPS  60.0
// #define AMBI_FALLOFF  0.40
// #define AMBI_POWER  1.8
// #define AMBI_INT_OFFSET  0.07
// #define AMBI_STRETCH  0.0
// #define AMBI_STRETCH_VERTICAL  0.5
// #define AMBI_GAMMA  1.3
// #define AMBI_OVER_BEZEL  0.2
// #define AMBI_OVER_BEZEL_SIZE  0.15
// #define AMBI_BG_IMAGE_BLEND_MODE  0.0
// #define AMBI_ADD_ON_BLACK  1.0
// #define AMBI_BG_IMAGE_FORCE  0.0


// #define DO_VIGNETTE  1.0
// #define V_SIZE  1.08
// #define V_POWER  1.00

// #define DO_SPOT  1.0
// #define S_POSITION_X  1.0
// #define S_POSITION_Y  1.0
// #define S_SIZE  0.4
// #define S_POWER  0.05


// #define DO_GLOBAL_SHZO  0.0
// #define GLOBAL_OFFX  0.0
// #define GLOBAL_OFFY  0.0
// #define GLOBAL_ZOOM  2.0


// #define ASPECT_X  0.0
// #define ASPECT_Y  3.0


// #define DO_DYNZOOM  1.0


// #define DO_GAME_GEOM_OVERRIDE  0.0
// #define GAME_GEOM_INT_SCALE  0.0
// #define GAME_GEOM_INT_SCALE_MAX  10.0
// #define GAME_GEOM_INT_SCALE_OVR 1.0


// #define GAME_GEOM_ASPECT  0.0
// #define GAME_GEOM_VSHIFT  0.0
// #define GAME_GEOM_HSHIFT  0.0
// #define GAME_GEOM_ZOOM  1.0
// #define GAME_GEOM_OFF_FIX  0.0


// #define DO_TILT  0.0
// #define TILT_X  0.0
// #define TILT_FOV  0.7
// #define TILT_BEZEL_K  1.0


// #define DELTA_RENDER_FORCE_REFRESH  4.0
// #define DELTA_RENDER_CHECK_AREA  1.0


// Developer reminder: bash script to partially convert a shader preset 
// edit: obsolete and incomplete since it does not recur references.
// for l in $(cat /koko/.config/retroarch/shaders/test.slangp |grep ^[A-Z] ) ; do p=$(echo $l|cut -d " " -f 1) ; v=$(echo $l | cut -d \" -f 2); echo \// #define $p $v; done

//DONT DELETE THIS LINE
